1/2" Gas Regulator Fits Natural Gas and Liquefied Gas Interchange Pressure Regul

Description: ➤▶ The 1/2 PSI gas regulator of the 102-B model is compatible with natural gas and liquefied gas valves. The valve inlet and outlet are both 1/2” FPT pipe thread. We have additionally equipped with brass 1/2" NPT conversion adapter-1/2" NPT male x 3/8" flare male. 1/2" NPT male x 1/2" NPT male thread. plus joint thread tape➤▶ When the LPG gas regulating valve is used: LP inlet pressure is 2.74Kpa(11"w.c), outlet pressure is 2.45~2.55 kpa(10"w.c), and gas flow rate is 30L/min➤▶ When the natural gas regulating valve is used: LP inlet pressure is 1.74Kpa(7"w.c). Outlet pressure is 0.95~1.05 kpa(4"w.c), flow rate: 50L/min➤▶ The air valve is set to LP state at the factory, and it is used when exchange to the NG gas valve. Please unscrew the 20.3mm diameter aluminum knob in the gas valve to switch the direction of the LP/NG copper shaft core. LP to NG or NG to LP conversion is simple, fast, and convenient, Compatible with two types of gas valves.➤▶WARM TIPS ：Rated operating temperature of gas valve is-32°F-225°F (0°C-107°C)， Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator. And the gas pressure regulator will not turn off the flow of gas. Product Description Compatible with natural gas and liquid propane gas pressure regulator valves The gas valve inlet and outlet are both 1/2” FPT pipe threadThe brass 1/2" NPT conversion adapter: 1/2" NPT male x 3/8" flare male 1/2" NPT male x 1/2" NPT OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Overall Dimension: 2-9/10” W x 2-3/10” D x 2-3/5” H. Liquid Propane Gas Pressure Regulator Factory setting is LP gas regulator mode You can open the conversion shaft in the aluminum cover to view, pay attention to the direction of the conversion shaft LP arrow pointing to the aluminum cover After confirming that the direction indicated by the arrow of the conversion shaft LP is correct, screw knob the aluminum cover assembly into the gas pressure regulator valve, then use it as Liquid Propane Gas Pressure Regulator. Natural Gas Pressure Regulator Convert to Natural Gas Pressure Regulator： Rotate and open the aluminum cover of the valve first, the brass NG gas shaft to exchange direction Sure confirm the direction of the NG brass shaft, screw knob the aluminum cover assembly into the gas pressure regulator valve After confirming that the direction indicated by the arrow of the conversion shaft NG is correct, screw knob the aluminum cover assembly into the gas pressure regulator valve .then use it as Natural Gas Pressure Regulator. 1/2 PSI gas regulator CSA certification The valve inlet and outlet are both 1/2” FPT pipe thread Compatible with natural gas and liquid propane gas pressure regulator valves Wide range of applications: For natural gas and liquid propane applications, propane fire pits, natural gas fire pits, gas stoves, water heaters, residential/commercial water tanks and tankless water heaters, boilers, fryer, stoves 1/2"LPG Gas Regulating Valve LPG inlet pressure: 2.74 Kpa(11"W.C);outlet pressure: 2.45~2.55 Kpa(10" W.C)Flow rate: 30 L/min 1/2" Natura Gas Regulating Valve Natura inlet pressure: 1.74 Kpa(7"W.C);outlet pressure:0.95~1.05 Kpa(4" W.C)Flow rate: 50 L/min

Price: 41.45 USD

Location: Honey Grove, Texas

End Time: 2024-12-05T07:34:41.000Z

Shipping Cost: 0 USD