Description: All Listing Home Hot Listing Contect Us Feedback Store Categories Store Categories Control Arm Suspension Kit BALL JOINT TIE ROD END BUSHING Stabilizer Bar Link Steering Idler Arm Other 14pc Suspension Kit Sway Idler For 1995-2000 Chevy & GMC K1500 K2500 Tahoe Yukon Why Astarpro OE Design-restore OE performance, handing and ride Maximum Coverage-Convenient solution, complete repair, application specific Quality Innovation-Re-engineered by OE defect, keep maximum fixation Package Includes: 2x Front Lower Ball Joint - K6477 2x Front Upper Ball Joint - K6292 2x Front Stabilizer Bar Link - K6428 2x Front Outer Tie Rod End - ES2836RL 2x Front Inner Tie Rod End - ES2838RL 2x Adjustment Sleeve - ES2004S 1x Pitman Arm - K6335 1x Idler Arm - K6447 Spectrum Analyzing Salt Spraying Testing Three-coordinate Measuring Magnetic Flaw Detection Rubber Oxidation Testing Hardness Testing Pull-out Force Testing Endurance Testing Fitment: **FITS 4WD / 4x4 MODELS ONLY; 45.79 mm Diameter Press-In Lower Ball Joint w/Independent Front Suspension; Fits models with Stamped Steel Control Arms only* Replacement for 1999-2000 Cadillac Escalade (4WD) Replacement for 1995-1999 Chevrolet K1500 Replacement for 1995-1999 Chevrolet K1500 Suburban Replacement for 1995-2000 Chevrolet K2500 (6-LUG 7,200 Lb. GVW) Replacement for 1995-1999 Chevrolet K2500 Suburban Replacement for 1995-2000 Chevrolet Tahoe (4WD;V8 350 5.7L) Replacement for 1995-1999 GMC K1500 Replacement for 1995-1999 GMC K1500 Suburban Replacement for 1995-2000 GMC K2500 (6-LUG 7,200 Lb. GVW) Replacement for 1995-1997 GMC Yukon (4WD;V8 350 5.7L) Replacement for 1998-1999 GMC Yukon (4WD) Replacement for 2000 GMC Yukon (4WD; V8 350 5.7L) Qualified Product High strength patented multi-lip locking boot and Labor Saver hardware included for quick easy install. Easy-snap locking pin securely locks the ball joint. Pre-locked Thread Thread lock is pre-applied on inner tie rods, removing the need of applying it and reducing the time of installing the product. Longer Wrench Flat Tie rods designed with longer wrench flats that provide a larger area for using a wrench which eases installation. Greaseable socket Pre-greased ball joint with Grease fitting allowing lubricant to flush contaminants and can extend service life. Steering Tie Rod End should be checked and replaced when you encounter the following problems: Steering Wheel Vibrations When the Steering Tie Rod End become excessively worn, it will make wheel shimmy, which may cause vibrations felt in the wheel.The intensity of the vibrations will increase as you step on the accelerator pedal to go faster. Clunking Noises If Steering Tie Rod End develop excessive play or looseness, this can cause them to knock during takeoff, or when the vehicle is traveling over rough terrain. The clunking sound will continuously get louder as the component wears or until it eventually breaks. Steering Wandering Excessively worn Steering Tie Rod End can cause the vehicle’s steering alignment to shift, which may cause the steering to pull to the left or right when traveling down the road. Shipping Payment Return Contect us Shipping Monday-Friday(excluding weekend and holidays)tracking number will be provided once items are shipped. Normally the package will be delivered within 3-5 business days. If don't receive your item within 10 days, pls contact us immediately, we will do our best to press the shipment company to send it fast. Payment We only accept Paypal or Credit Card! Return 30 Days easy returns satisfaction guarantee. Items to be returned must be in original factory condition. Please enclose a note about item number and order id, your eBay ID and the reason of return. Contect us At Astarpro, we offer exceptional and fast service to ensure you get the right parts as quick as possible. If you have any questions regarding out parts and services, please ask us a question. Business HoursMonday to Friday: 8:00 am - 7:00 pm ETSaturday: 9:00 am - 6:00 pm ETSunday: 9:00 am - 5:00 pm ET You may also send us an email through eBay at the top right corner of this page. 14pc Suspension Kit Sway Idler For 1995-2000 Chevy & GMC K1500 K2500 Tahoe Yukon Package Includes: 2x Front Lower Ball Joint - K6477 2x Front Upper Ball Joint - K6292 2x Front Stabilizer Bar Link - K6428 2x Front Outer Tie Rod End - ES2836RL 2x Front Inner Tie Rod End - ES2838RL 2x Adjustment Sleeve - ES2004S 1x Pitman Arm - K6335 1x Idler Arm - K6447 **FITS 4WD / 4x4 MODELS ONLY; 45.79 mm Diameter Press-In Lower Ball Joint w/Independent Front Suspension; Fits models with Stamped Steel Control Arms only* Replacement for 1999-2000 Cadillac Escalade (4WD) Replacement for 1995-1999 Chevrolet K1500 Replacement for 1995-1999 Chevrolet K1500 Suburban Replacement for 1995-2000 Chevrolet K2500 (6-LUG 7,200 Lb. GVW) Replacement for 1995-1999 Chevrolet K2500 Suburban Replacement for 1995-2000 Chevrolet Tahoe (4WD;V8 350 5.7L) Replacement for 1995-1999 GMC K1500 Replacement for 1995-1999 GMC K1500 Suburban Replacement for 1995-2000 GMC K2500 (6-LUG 7,200 Lb. GVW) Replacement for 1995-1997 GMC Yukon (4WD;V8 350 5.7L) Replacement for 1998-1999 GMC Yukon (4WD) Replacement for 2000 GMC Yukon (4WD; V8 350 5.7L) About us : If you need more informations, or need more quantity, or have other problems. Please contact me in eBay message.More quantity more discounts------>>> Just contact usShipping:We can ship it from DHL、UPS、FEDEX、etc.We can according to your purchase of specific goods delivery channel choice! If you need to specify the courier service, you can leave us a message on eBay.International Customers(Buyers) are responsible for all Customs fees, import taxes, VAT, and other fees applied by their respective countries You are required to assist in customs clearance if necessary.Feedback:If you have any question about the product when you receive it Please feel free to contact us first We keep our promises that we will provide you with the best solution within 24 hours.We strive for 100% customer satisfaction,therefore, your positive feedback is very important. Thank you Payment We only accept Paypal or Credit Card! Return 30 Days easy returns satisfaction guarantee. Items to be returned must be in original factory condition. Please enclose a note about item number and order id, your eBay ID and the reason of return. Contect us At Astarpro, we offer exceptional and fast service to ensure you get the right parts as quick as possible. If you have any questions regarding out parts and services, please ask us a question. Business HoursMonday to Friday: 8:00 am - 7:00 pm ETSaturday: 9:00 am - 6:00 pm ETSunday: 9:00 am - 5:00 pm ET You may also send us an email through eBay at the top right corner of this page.
Price: 70.36 USD
Location: Chino, California
End Time: 2024-09-01T08:02:41.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Brand: ASTARPRO
Type: Control Arm & Ball Joint Assembly
Manufacturer Warranty: 2 Years
OE/OEM Part Number: ES2004S ES2836RL ES2838RL K6292 K6335 K6428 K6447 K6477
Items Included: Nut
Manufacturer Part Number: ZK6477-ZK6292-14
UPC: Does not apply
Features: 100% Accuracy of Fit, Easy to Replace
Material: Steel
Placement on Vehicle: Front, Inner, Left, Lower, Outer, Right, Upper
Item Weight: 22.2 pounds