Description: Clock / Gauge GlassSlightly concave/convex depending on which way you are looking at it60mm Diameter (about 2 3/8")Glass is about 1.8mm thickNote: the diameters can vary + or - 1mm due to manufacturingIf you need these slightly smaller, you can use a belt sander. Turn it upside down on your workbench, use a sharpie to mark off what you need to remove, and slowly grind off a little glass EVENLY all the way around. Use gloves and eye protection!Practice on some scrap glass first.If the glass is a little loose, you can use a little silicone to seal it into place, or a continuous grommet around the perimeter When you measure your size, be sure to allow a little space for "wiggle" room. ie, do not expect a 2" piece of glass to fit into your 2" opening. If you are lucky, it might fit, but more likely you'll need to "adjust" the glass down a smidge by sanding all of the edges with 120 grit sandpaper. Removing just 1/16" from all around will reduce the diameter by 1/8"!. IF YOU ARE NOT WILLING TO WORK AT THIS SOME, BUY YOUR GLASS ELSEWHERE. If you are outside the USA, kindly e-mail me first. Continental USA only; Others E-Mail first
Price: 3.1 USD
Location: Seminole, Florida
End Time: 2024-12-01T01:41:55.000Z
Shipping Cost: 4.4 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Type: Clock Parts
Brand: Unbranded
