HVAC Motorized Zone Control Large Rectangular Damper with 2 Wire Synchron Motor

Description: 3151 Series Motorized Large Rectangular Power Open OR Power Close 24vac Damper for Zone Control or HVAC Air Control Applications Damper comes with motor installed. All dampers are slightly undersized to slip into an existing duct. Due to large number of sizes and configurations available, these dampers are not returnable and are non-refundable. Ask questions and measure your duct carefully to ensure you order the correct size. Dampers are shipped about 1/8” undersized in each dimension to insure they will fit in a standard size rectangular duct. Please note this damper is made to order. Handling time is estimated at 15 days to allow factory to build damper to your specifications. As soon as we receive tracking information from the factory, we will let you know that your item has shipped. Many times dampers are shipped out sooner than the estimate; however, please allow up to 15 days to produce your damper. These dampers cannot be shipped internationally, including to Canada. Please use freight forwarder based in the United States. If you’re interested in a 3 wire damper, see our commercial grade Belimo- powered SD3085 series dampers in our ebay store damperdirect: Link to small size Belimo powered SD3085 series dampers (6x8” to 12x14”): https://www.ebay.com/itm/121484153179. Link to medium size Belimo powered SD3085 series dampers (6x16” to 14x18”): https://www.ebay.com/itm/121487046008. Link to large size Belimo powered SD3085 series dampers (6x26” to 24x24”): https://www.ebay.com/itm/351224514523. 3151 Series Motors Large Rectangular Power Open OR Power Close 24vac Damper Available Large Standard Sizes:Standard Damper Sizes (in even inch increments): 8x20, 8x22, 8x24, 10x16, 10x18, 10x20, 10x22, 10x24, 12x14, 12x16, 12x18, 12x20, 12x22, 12x24, 14x14, 14x16, 14x18, 14x20, 14x22, 14x24Odd Sizes: Yes we will do odd sizes in one inch increments. There is an additional $10.00 charge for odd size dampers. Note: When you place order, please specify: (1) motor on "long side" or "short side”; and (2) power open/spring close or power close/spring open.Note: If you are using this damper connected to a zoning system board, you will want power close/spring open, If you are using damper tied directly to a thermostat, you will want a power open/spring close. If you don't find the size you need here, check out our other ebay listing for smaller damper sizes:Small (for sizes listed below): eBay Item # 350269149906 at link: https://www.ebay.com/itm/350269149906. 6x6, 6x8, 6x10, 6x12, 6x14, 6x16, 6x18, 6x20, 6x22, 6x24, 8x8, 8x10, 8x12, 8x14, 8x16, 8x18, 10x10, 10x12,10x14, 12x12This damper is sold nationwide under a major HVAC manufacturer's name and is our most popular rectangular damper. Damper is available in any of the sizes listed above for this price. Used for zone control systems or slave zones into unoccupied areas, these dampers are all 24vac driven and can be connected directly to a thermostat for simple control of any room or office. Constructed of all aluminum and stainless steel parts for long corrosion free operation, these dampers are tested to the industry standard 250,000 cycles of operation, and carry a one year guarantee. All damper blades ride in nylon bushings for rattle free operation, unlike some other brands, and feature the most popular motor in the industry, a made in the USA genuine Synchron motor - not a cheap import. These are top quality dampers that are being sold factory direct through our ebay store damperdirect. The only thing these dampers are missing is the several levels of price markup that is usually present on this type of damper.damperdirect is run by RetroZone Inc. We specialize in HVAC zone control systems and dampers. Qualified technical assistance is a hallmark of our service, so please message us through ebay with any questions. If you are building a new home or trying to solve comfort or energy problems, air control dampers can be a great solution!These dampers also work great with existing duct systems, and are compatible with most thermostats and 24vac transformers. If you need multiple dampers per zone, check out our retrofit Flexdampers™ at damperdirect: Link to FlexDamper™ Kit: https://www.ebay.com/itm/352962719979.Link to FlexDamper™ System with 20 dampers included: https://www.ebay.com/itm/121911926782. Zoning control and air control become feasible with the FlexDamper™ System even when you need 10 or 20 dampers in a duct system.Steps to ordering: Rectangular Dampers:1. Size: Choose any size above; odd sizes can be accommodated, but add a $10.00 charge. Dampers usually ship within 15 days. All dampers are slightly undersized to slip into an existing duct. Add foam weather stripping to the outside of housing to take up any extra space and get a tight fit.2. Choose Motor Configuration: “Power Open/Spring Close” OR "Power Close/Spring Open”. Specify what you want this spring return damper to do when power is removed, either open or close. Tip: If you are hooking this damper to a simple thermostat for direct control, order “Power Open/ Spring Close”. If used in a zone control system, order “Power Close/Spring Open”.3. On which side do you want the motor mounted? Standard and most common is a side mounted motor on the short side of the damper, but you can also have the motor placed on the long side, or bottom, of damper, at no extra charge. 4. Choose motor voltage: Our standard dampers are 24vac, which is the standard voltage in the HVAC industry; however, 110vac is also available for an additional charge of $11.00. 5. How to order: Just buy a damper(s) in the above size range you need, then in ebay "notes" please specify the (a) size; (b) motor configuration; (c) on which side you want the motor mounted; and (d) if you want an 110 vac motor. If you don’t specify the motor voltage, we will send out the 24vac motor. However, we will not ship your damper until you tell us the information set out above. If you order an option that costs more, just buy a damper at the price shown, and ask us in ebay to "send you an invoice" and we will correct the price before you pay. Since dampers are made to your specifications, ask questions and measure your duct carefully to ensure you order the correct size. These dampers are not returnable and non-refundable - please see return information below. Dampers are shipped about 1/8” undersized in each dimension to insure they will fit in a standard size rectangular duct. All dampers are 24vac operated unless 110vac is specified in “notes” 110vac available for extra $11.00 Industry standard genuine Synchron USA built motor Precision aluminum blades 2 wire operation Standard damper rated to 1” pressure (residential and light commercial, - consult factory for higher pressure ratings) Requires a 2.5 to 3” slot in side of duct to install - motor faceplate is 5“ wide 15 second or less actuation time on standard motor Message us through ebay with questions, we offer or can build almost any damper, including commercial grade dampers. Returns: Since dampers are built to your specifications, these dampers are not returnable and are non-refundable. Ask questions and measure your duct carefully to ensure you order the correct size.

Price: 165.38 USD

Location: Allen, Texas

End Time: 2024-07-23T22:13:08.000Z

Shipping Cost: 18 USD