Samsung Stove Knob Fix - DG94-02861

Description: This is a listing for 3d printed repair backplates for your DG94-02861 Samsung stove knobs. These are for your knobs if their shaft is completely destroyed, or you have lost the spring clip for the knob. DISCLAIMER -- YOU MUST MODIFY YOUR KNOB BY REMOVING THE SHAFT FOR THIS REPAIR TO WORK! As shown in the photos, you must cut the shaft down to where indicated in the photo with the screwdriver so the repair ring can sit flush. You will also need to remove the rubber gasket on your stove for this repair solution to fit. There are two variations of this item -- one is thin, one is thick. The thin version will allow you to still use the heavy metal washer screwed to the back of your knob. This will make the knob still feel heavy and substantial, but the thinner nature of this repair back may not last as long as the thicker variation. The thick version eliminates the metal washer, so the knob won't feel quite as heavy or substantial. However, the thicker nature of this repair back will certainly last longer & be more durable than the thin version. If you have a different model of knob and need a repair / fix solution, please send me a message and I'll do whatever I can to help you out!

Price: 5 USD

Location: Owego, New York

End Time: 2024-11-30T22:43:46.000Z

Shipping Cost: 0 USD